Lots of WiFi, but nobody runs it
Seven WiFi networks from two brands, no updates and no conductor. Only the technician knows the password and how to manage it – and he’s forgotten.
What we see
Most networks weren’t built.
They just grew.
Someone added a router, someone else a mesh, then more cameras. After a while nobody knows
what goes where, and every change is a gamble.
Basic security and updates are missing – and when the network goes down, so do the tills.
Five mesh units, still slow
More devices don’t mean better coverage. The boxes don’t talk to each other and speed drops – worst of all on calls or during the Champions League.
A full rack nobody understands
Unsupported boxes, no documentation, no security. Nobody knows what happens when something dies.
Sockets and cables – but where do they go?
Ethernet everywhere, cables without labels. What’s plugged in where becomes clear when a camera drops out or the TV loses Netflix.
From the field: most recently we rebuilt a rack like this in a family house – more than ten cameras, four switches and WiFi on two floors.
Building or renovating? See how we design the network at the planning stageHow we work
We never rebuild blindly.
A good network starts on paper.
You have a network, but something doesn’t work, is missing or nobody understands it. First we find out what’s in it – only then do we change anything.
You’re building, renovating or replacing the whole network. Decisions are made while the walls are still open – a cable or WiFi missing from the plan is hard to add later.
- 1A thorough survey*
We check every socket and cable and trace where it leads.
usually 1–2 h - 2What is really used
Which services run, who needs them and what is just history.
- 3Design and quote
What stays, what gets replaced and at what cost.
the key step - 4Remove what’s not needed
Fewer boxes, fewer faults, fewer passwords, lower power use.
- 5Add and reconnect
We add what’s missing. One system, everything labelled.
* Survey, measurements or work on drawings including the design: CZK 1,999 excl. VAT. If we then build your network, the amount is deducted from the installation price.
- 1Brief
Who uses the network, what it must do, how many devices and what must never go down.
- 2Plans and measurements*
Building drawings, or measuring what’s already there.
usually 1–2 h - 3Design and budget
WiFi, cabling, rack. In stages if you like.
the key step - 4Preparation
A tested internet connection, materials and people ready.
- 5Installation
Rack, WiFi and other devices in place, configured and measured.
* Survey, measurements or work on drawings including the design: CZK 1,999 excl. VAT. If we then build your network, the amount is deducted from the installation price.
6
Handover and monitoring
- Managed in the UniFi app
- Documentation of ports and devices
- Network monitoring for 14 days included, then optional
Solutions
For homes, offices, businesses and venues.
Every solution starts with a phone call and a meeting – on site or over the drawings.
Family home
Fast WiFi at home, on every floor
For a house or flat, one floor or several – whether the WiFi doesn’t reach or you’re still building.
- Gateway and WiFi
- Survey of existing cabling
- Guest WiFi and parental controls
- Managed through the UniFi app
from CZK 8,999 excl. VAT
1× UniFi Express 7 including installation, survey and 14 days of monitoring
Office
A network that doesn’t hold up work
For 5–20 people, shared printers, the kitchen, the meeting room and visitors.
- Gateway with switch and ceiling WiFi
- Separate networks for the team, visitors and devices
- VPN for working from home
- Monitoring (optional)
- Managed through the UniFi app
from CZK 13,999 excl. VAT
1× UniFi Cloud Gateway Fiber, 1× U7 Pro (more access points depending on the layout) including installation, survey and 14 days of monitoring
Business
Infrastructure that survives an outage
For several departments or floors, servers, cameras and security requirements.
- Backup internet and UPS
- Network segmentation and firewall
- VPN and remote access
- Network documentation
- Monitoring (optional)
Priced by scope
after a meeting and design
Venues and production
Operations that never stop
Production, warehouses, cafés, accommodation – places where a network outage means everything stops.
- Coverage for halls and outdoor areas
- Separate networks for operations, cameras and guests
- Redundant gateway, switches and power
- Monitoring (optional)
Priced by scope
after a meeting and design
What we build on your network
The network is the foundation.
We build more on top of it.
Cameras and smart homes stand or fall with the network. Because we know it,
we add them without improvising – as an add-on to any solution.
Add-on
Cameras and access
Cameras, sensors and readers in the same system as the network. The security of the system and of your data stays fully in your hands.
- UniFi Protect cameras with AI
- Sensors and entry readers
- Backup power via UPS
- Recording to disk, off-site backup
- Taking over existing cameras
- Live view on your TV
Add-on
Smart home
Lights, heating, blinds and sensors in one home app (Home Assistant). An open platform no manufacturer can lock you into.
- Runs in your home, not in the cloud
- Modules for the distribution board and switches
- Automated lighting and heating
- Linked with cameras and sensors
- A separate network for smart devices
- Backups and updates
Care after installation
Installation is not the end.
We monitor the network for the first 14 days at no extra cost. After that you can keep monitoring for a monthly fee – and when something goes wrong, we often fix it before you notice.
Monitoring
We watch for connection outages and device health.
Remote
We solve most things without a visit.
Coverage
We fine-tune the WiFi to how you actually use it.
Security
We keep track of updates and security advisories.
About us
Two people, one team.
For 14 years at Algorim we have been designing software systems that simply have to work. We approach networks the same way: understand first, then design, then build it properly.
Martin
Comes to the first meeting, surveys the building and prepares the design and budget. Builds infrastructure you understand.
Honza
Configures the network, hands it over and keeps looking after it. After installation he’s your person whenever you need anything.
We start with a call
Tell us what you need.
Existing network, upgrade or new build – we’ll get back to you, talk it through and arrange a meeting on site or over the drawings. Then you get a concrete proposal.
The first call is free. A meeting on site or over the drawings is charged as a survey – and deducted if we do the installation.
Thank you for getting in touch.
We’ve received your message and will get back to you soon – by phone or email.
Gallery
Real installations. Nothing staged.
Photos from our jobs – before and after. Click a photo to enlarge it.
Want a result like this at your place?Get in touch
